Products

DESCRIPTION

Basic Info.

Model NO.	GB
Material	Polyester
Type	Bentonite
Sample	Free
Standard	ASTM GB
Length	20-40m
Width	1-6m
Transport Package	Woven Geotextile + Steel Rolls
Specification	3000g-6500g
Trademark	INNO
Origin	China
HS Code	6815999000
Production Capacity	50000sqm/Per Day Depends on The Specification

Product Description

Product introductionBentonite waterproof liner (GCL) is a new geosynthetic material. Taking natural sodium bentonite as material, bentonite particles are fixed between two layers of geotextile by special process to make bentonite waterproof blanket, which not only has all the characteristics of geotechnical materials, but also has excellent waterproof (seepage) performance.O Product features

• It has excellent water swelling property and strong compactness;
• Durable waterproof performance, green environmental protection;

. With the functions of separation, reinforcement, protection and filtration, the construction is simple. O Product specification3OOOg/m2-6OOO0/mz; Width: 3-6M

MATERIAL PROPERTY	TEST METHOD	TEST FREQUENCYft2(m2)	REQUIRED VALUES
Bentonite Swell Index1	ASTM D 5890	1 per 50 tonnes	24 mL/2g min.
Bentonite Fluid Loss1	ASTM D 5891	1 per 50 tonnes	18 mL max.
Bentonite Mass/Area2	ASTM D 5993	40,000 ft2 (4,000 m2)	0.75 lb/ft2 (3.6 kg/m2) min
GCL Grab Strength3	ASTM D 6768	200,000 ft2 (20,000 m2)	50 lbs/in (88 N/cm) MARV
GCL Peel Strength3	ASTM D 6496	40,000 ft2 (4,000 m2)	3.5 lbs/in (6.1 N/cm) min
GCL Index Flux4	ASTM D 5887	Weekly	1 x 10-8 m3/m2/sec max
GCL Hydraulic Conductivity4	ASTM D 5887	Weekly	5 x 10-9 cm/sec max
GCL Hydrated Internal Shear Strength5	ASTM D 5321ASTM D 6243	Periodic	500 psf (24 kPa) typ @200 psf

2 Before laying the bentonite waterproof blanket (GCL), there should be corresponding qualified acceptance documents for the preliminary project.3 Before cutting the bentonite waterproof blanket (GCL), the relevant dimensions should be accurately measured, and then cut according to the actual terrain, and numbered piece by piece. The relevant information should be recorded on a special form. Laying bentonite waterproof blanket (GCL)It must be dry and tidy, and no oil stains, splashed chemicals or chemical spots that damage the bentonite waterproof blanket (GCL) should be allowed on the surface.4 Bentonite waterproof blanket (GCL) cannot be constructed in rainy weather and when there is water on the ground. To5 In order to enhance the friction, the fiber of the waterproof pad is laid facing the base surface.6 When laying the bentonite waterproof blanket (GCL), the joints should be minimized, and the raw materials should be saved as much as possible under the premise of ensuring the quality.7 When laying the bottom surface, it should be overlapped in parallel, but not in parallel. The cloth surface should not be stretched too tightly or folded, and should be loosened appropriately and close to the ground;8 When laying GCL when it encounters through parts, double-layer GCL waterproof pads should be laid within 500mm of the through objects. At the contact parts between GCL and the through objects, the upper and lower layers of GCL form a bell mouth, and the distance between the contact line and the through objects is at least greater than 50mm, GCL oblique mouth length is about 100mm, the gap between the two pads is filled with bentonite powder (it can also be filled with bentonite cement), and the joint between the upper layer of small waterproof pad and the lower layer of the entire waterproof pad should be glued and reworked. Fixed treatment9 During laying, if the waterproof pad is damaged, apply a waterproof pad larger than 300mm around the damaged gap to cover it before fixing it;10 When laying, if it rains, use plastic film material or rain-shielding material to quickly cover it. When the rain is heavy and the bentonite swells more than 300%, it should be re-laid;11 When laying, it is strictly forbidden to put open flames or cigarette butts on any side of the waterproof pad.Three, fixed1 When laying, shop from top to bottom, and the direction of overlap is adapted to local conditions. Lay along the slope, and the joints must be parallel to the slope line and not intersect with the slope line.2 In the deformed areas at the corners, the length of the joints should be as short as possible. At the toe of the slope or the place where the stress is concentrated, the horizontal joint distance must be greater than 1.5 meters. Except for special requirements, there should be no horizontal angle within 1.5 meters from the top of the slope or the stress concentration area on a slope with a slope greater than 1:6 Small 45°C seams.3 When laying the Bentonite Waterproof Blanket (GCL), do not let stones, etc., which may damage the Bentonite Waterproof Blanket (GCL), or make the subsequent connection difficult, enter the Bentonite Waterproof Blanket (GCL) or under it.4 On the slope surface, one end of the bentonite waterproof blanket (GCL) must be anchored, and then the coiled material must be put down along the slope surface to ensure that the bentonite waterproof blanket (GCL) remains tight. All bentonite waterproof blankets (GCL) must be pressed with sandbags, which will be used during laying and will be retained until the layer of material on top of laying.5 After laying the bentonite waterproof blanket (GCL), it should be permanently anchored in time.6 Sufficient temporary ballast (such as sandbags) is required during construction to prevent laying bentonite waterproof blanket (GCL)Blowed by strong winds, the pressing materials used must be materials that will not damage the bentonite waterproof blanket (GCL), and retain them until the layer of material is laid.7 While laying the bentonite waterproof blanket (GCL), the installation unit must take all necessary measures to prevent damage to the underlying material.8 After installation, visually inspect the surface of all the bentonite waterproof blankets (GCL), mark and repair all the damaged areas, and make sure that there are no foreign substances, such as stones, that can cause damage to the paving surface. ToFour, connection
To get more information pls contact us freely

Shandong Innovative Material Technology Co., Ltd. was founded in November, 2018, covering an area of 196 mu; Registered address: No. 6399, East Tianqu Road, Dezhou; The registered capital is 260million yuan; Main business: focus on the research and development, production, construction, and sales service of high-end new geosynthetics.The company has the world leading production line of polypropylene filament geotextile, domestic advanced staple fiber needle punched geotextile production, line, high density polyethylene geomembrane production line, composite geomembrane and composite geotextile production line. Polypropylene filament geotextile adopts the latest developed process equipment production line of Oeriikon and OBA company in Germany. The product is acid resistant, alkali resistant and corrosion resistant, which solves the problem of short service life of conventional products and of the adverse impact on engineering safety and environmental pollution after degradation. The world* s first 6.5m wide products enable the more convenient construction, the higher efficiency and great reduction of the usage cost.

Industrial chain up and down extension, continue to develop innovative productsThere are five categories of products and 60 specifications and models, among which frontier products account for more than 50% Capacity development: five production lines have been put into operation, with an annual capacity of more than 50000 tons
Dream for a creative future!With the enterprise vision, we set sail.We are based on the high-end brand of geosynthetics worldwide, and focus on exploring and developing new geosynthetics materials that are corrosion-resistant, weather resistant, durable, uniform, environmental-friendly andsafe, to professionally provide functional basic materials for major engineering construction projects such as highway, railway, water conservancy, sponge City, landfill, aerospaceand national defense.Since the start of business, every product and technology developed has condensed our wisdom and effort; every project implemented in the development has shown our vision and progress; every commitment to our customers has delivered our confidence and sincerity! Every achievement we have realizedis owed to the support and care firomleaders, experts, partners and friends!We deeply understand only by holding fast to the development concept of "achieving stems from sharing", can we gain more valuable cooperation opportunities and see a better industrial future. Looking forward to working with you, sharing the joy of development!